American Power Conversion Master Switch User Manual download pdf (Page 16)

MasterSwitch VM User’s Guide 11

Managing MasterSwitch VM

Management Interfaces continued

Control Console

interface

In addition to using the Web, you can also manage MasterSwitch

through the Control Console by one of the following modes of access:

• Telnet, for remote management

• A serial connection, for local management.

Telnet. To access the MasterSwitch

unit’s Control Console using

Telnet :

1. Start a Telnet session and choose Remote System from the

Connect pull-down menu.

2. Type in the IP address of the MasterSwitch

unit.

3. Click on the Connect button.

Serial connection. To access the Control Console using a serial

connection:

1. Use the supplied configuration cable (

APC

part number

940-

0024

C) to connect your serial port to the configuration port on

the MasterSwitch

Controller.

2. Set the terminal port for the following communication settings:

Logging on. The procedure for logging on to the Control Console is the

same for both Telnet and a serial connection; respond to the user name

and password prompts.The default values of Administrator name and

password are both apc, all lowercase. You can change the username,

password and time-out values through the System menu. See

User

Manager on page 23

Structure. All menus in the Control Console list items by number and

name. To select an item, type in the number and press E

NTER

.For

menus that configure values, always use the

Accept Changes

option to

save any changes you have made.

Continued on next page

Item Setting

Baud Rate

2400

Data Bits

Stop Bits

Parity None

Handshaking None

Local Echo Off

Terminal Type

ANSI

(

VT100

)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 42 43

Comments to this Manuals

No comments

American Power Conversion Master Switch User Manual Page 16

Comments to this Manuals

Related products and manuals for Power distribution units (PDUs) American Power Conversion Master Switch